I am trying out my new Razer Hydra and all works well. However, what I'm noticing is that when you use the joysticks and the buttons too much the gestures seem not to respond for about a few seconds.
I am using this .mce with Street Fighter X Tekken and causing this problem.
StreetFighterXTekken.mce
Is this problem common or is it something in the .mce? Could this problem be arranged some way?
Just to know this, I indirectly solved the problem by changing the gestured needed to activate the combos from tilt left and right to tilt cw and ccw. The Hydra is working perfectly now exactly how I wanted for street fighter x tekken, doing the cross art finishes exactly when I want them to be in just a few milliseconds!!
I have this problem sometimes. I notice it especially with some games. Most obvious is Zeno Clash.
Ive also thought that it might in some cases be the game.
Ive noticed that in some case the game dont allow a keyboard press when another keyboardpress is used, and the hydra button and presses is mapped to the keyboard and mouse. For example i made a mce for E.Y.E. where there is a keypress for walking really slow, which you press together with w-a-s-d. But the game dont allow leaning left or right when you press w-a-s-d. That seems reasonable when you are running or walking. But i put walk-slow/walk-normal-speed/run all on the right joystick, and in game it gave me the impression that the hydra controls stopped working when i could not lean sometimes and could another time, even i was barely moving.
Anyway, when i am making an mce and is finding that this things happen, i try to look if the same thing works fluently with keyboard and mouse instead. I also try to see if there is some disable or enable binding/bindinggroup that interferes.
In my Skyrim mce i have mouse on right joystick and also mouselook on right controller, but when i hold a button i set right controller to 4-way and use it for shortcuts instead. Sometimes mouselook and joystickmouse stops function at some random point (even after gaming for 2 hours) and i have to restart the game to get it back. This is mysterious.
Sometimes some binding is invisible in mceditor (because somebody gave them no name) but you can notice it because of the gap between bindings, and klick it. But i have noticed a more strange thing. My old Crysis2 mce had steam overlay set to hold left start button, and i opened it in the newest mceditor and changed the condition to holding ratchet (right button 1) and holding the controllers tight together. In game my new movement works, but i also get the steam overlay by holding left start (my old condition). I have looked through my mce many times in mceeditor trying to find if i left the old condition in there somewhere, but i cant find it. If i am right, that i didnt left the condition in there, then it must be that mceditior dont show all bindings and also dont fully save your changes, leaving bits and pieces of old bindings in there. If that is the case, that could mess up mce a lot, but also make it difficult to detect what is wrong.
Last edited by axelbernadotte; 06-22-2012 at 10:21 PM.
By the way, please upload your mce, i am going to buy street fighter x tekken
@Leonard
Try checking the disable exclusive check in ALL of your tilt cw or ccw on the controller in question. Did your problem go away?
@axelbernadotte
Steam is bound in the global.mce which is always running
Danny Woodall
Creative Director
Sixense Entertainment Inc.
Yes, it is now corrected and it works perfect. I works just as I wanted, I can now activate cross finish just at the end without activating Pandora which can ruin the battleOriginally Posted by Danny
Here's the new mce:
StreetFighterxTekken.mce
I didn't add Pandora as I don't like using it. You have to eliminate the opponent in just 10 seconds and if you play hardest, the opponent may not allow you do that without escaping the blows.
Enjoy using my mce!!
Posting Permissions
Reply With Quote