[Fulfilled] CoD: Modern Warfare 3 (Xbox Style request)

[ninditsu]

I would like to request an MCE for MW3 that has controls as close as possible to the xbox version layout. but i would also like the joystick for the mouse control along with the right hydra controller. i would also like to remind whoever helps me out to remember to add the button that allows you to re-center the controller.

thanks just for viewing my topic.
and double thanks to whoever fulfills my request

edit: to be more clear about how I want this done, I want the layout as follows (apologize for the extensiveness, but i just don't want to miss anything)


================
==Left Controller==
================
LT = Aim down sight (Right click)
LB = Tactical grenade (Q)
Joystick = Movement (WASD)
Joystick click = Sprint/Hold breath (Shift)
1 = Killstreak 2 (5)
2 = Killstreak 3 (6)
3 = Killstreak 1 (4)
4 = Killstreak 4 (7)
Start = Menu (Esc)
Left Shake = Reload (R)
Up Shake = Jump/Climb (Space)
Right Shake = Use (F)

=================
==Right Controller==
=================
RT = Shoot (Left click)
RB = Equipment (E)

Joystick = Aiming (Mouse, try to make the sensitivity like enough to do a 360 degree spin bunny-hop assuming the in-game sensitivity is at 0)

Hydra controller = Aiming (Mouse, yes two ways to control aiming. make sensitivity about the same as the joystick one)

Joystick click = Knife (V)
1 = Crouch/Prone (C)
2 = Switch weapon (1)
3 = Mouse controller re-center
4 = Switch weapon (1)
Start = Score (Tab)

Update: thanks scott! works perfectly as I wanted it, just a little difficult to get used to. here's hoping i actually do

[ninditsu]

been a few days, bump. thanks everybody

[Scott]

Try this:

[attachment=0:20i1qmy1]MW3_request.mce[/attachment:20i1qmy1]
I am not sure if you wanted cw/ccw or left/right on the tilt gestures for "Reload" and "Use". I made them left/right. Is this correct?

Also by recenter mouse I assume you mean "Ratchet"?

I think the sensitivities feel pretty close. Tell me if you want them tweaked at all.

NOTE: Make sure you uncheck the boxes in the MotionCreator app for any other MW3 profiles so that it doesn't try to launch those instead.

[ninditsu]

oh sorry yes, the cw/ccw for the tilt gestures. i didn't know the correct terminologies for this.

i guess ratcheting is the term for re-centering.

thanks. i'll try this first if i like it i won't come back and be a burden

thanks again.

[Scott]

Don't be shy about asking for changes. It only takes a couple minutes to adjust it. ;)

[ninditsu]

Well in that case, i need the joystick sensitivity just about an eighth of the current speed faster. Also, i need the positive y axis half of the x axis speed and the negative y axis speed about a third of the x axis speed

Thanks for helping

[Scott]

-Changed left/right tilt gestures to cw/ccw.
-Raised dual analog sensitivity by 1/8.
-Made mouselook sensitivity half as much on the Y axis (cannot do different +/- Y axis sensitivities)
-Cannot currently change Y axis sensitivity scale on dual analog.

[attachment=0:3q9tgv9j]MW3_request_v2.mce[/attachment:3q9tgv9j]

[ninditsu]

-Changed left/right tilt gestures to cw/ccw.
-Raised dual analog sensitivity by 1/8.
-Made mouselook sensitivity half as much on the Y axis (cannot do different +/- Y axis sensitivities)
-Cannot currently change Y axis sensitivity scale on dual analog.

[attachment=0:1lnf8n1w]MW3_request_v2.mce[/attachment:1lnf8n1w]

i'll try this but may i expect my previous request be fulfilled when the features that are missing are added?

thanks